Videos

Skip to content
Skip to main navigation
Skip to 1st column
Skip to 2nd column

Latest

	How does your company compare to other Canadian manufacturers? Our fifth annual Canadian Manufacturing Study
	Date: 16 August 2010 Category:

	Checking in on Canada's economic recovery Is Canada headed for another recession? And how does your company’s performance stack up to other Canadian manufacturers?
	Date: 29 July 2010 Category:

	How to keep Canadian manufacturers employed Following the release of a recent Labour Force Survey, we provide you with four tips on how to survive in the current economy.
	Date: 16 July 2010 Category:

	Confusion surrounding machine safety standards While Europe offers a clear direction when it comes to machine safety standards, North America does not. The onus, therefore, is on Canadian manufacturers to make sure they\'re keeping their employees safe.
	Date: 07 July 2010 Category:

	MA Editorial Board Roundtable In our June cover story, MA`s editorial board discusses ways in which manufacturers can make the most of the economic recovery. Here`s a sneak peak of what they had to say.
	Date: 15 June 2010 Category:

	MASC - Part 2 Manufacturing AUTOMATION showcases the latest products featured at the Machine Automation Safety Congress
	Date: 01 June 2010 Category:

	MASC recap - Part 1 Manufacturing AUTOMATION editor, Vanessa Chris, shows you around the Machine Automation Safety Congress
	Date: 19 May 2010 Category:

	Video Case Study: Firestone Textiles (Updated) By switching from analog to digital metering solutions, Firestone Textiles in Woodstock, Ont. was able to cut down on its energy usage and shave thousands off of its energy bills. For more energy management tips and tricks, check out the upcoming May issue of Manufacturing AUTOMATION. [More]
	Date: 06 May 2010 Category:

[ 1 ] - [ 2 ] - [ 3 ]

Most Viewed

	Editor Update: Dec. 23, 2009 - News New partnership between Magna and the NRC will support the Canadian auto industry in developing next-gen vehicles with lighter, more durable parts.
	Date: 24 December 2009 Category:

	AIME training initiative reopens application process after funding boost Innovative manufacturers will benefit from a $12-million investment in the AIME Initiative, reopening the application process until Jan. 15, 2010.
	Date: 01 December 2009 Category:

	WorldSkills Calgary 2009 Takes Off Reporter Carolyn Yates talks to various experts about WorldSkills, which took place in Calgary from Sept. 1 to 7.
	Date: 17 September 2009 Category:

	Machine Safety Round Table 2009: LOOKING AHEAD Our experts look at the technologies and trends to watch for in 2010.
	Date: 20 November 2009 Category:

	WorldSkills Calgary 2009: Focus on Mechatronics Benoit Maisonneuve, chief expert for the mechatronics competition, talks about the event. Competition footage included.
	Date: 17 September 2009 Category:

	Yves Landry Foundation AIME Initiative Watch this video to find out how Ontario manufacturers can qualify for up to $50,000 each to foster training that will lead to advancements in innovation.
	Date: 28 August 2009 Category:

	WorldSkills Calgary 2009: Focus on Mobile Robotics Bob Tone, chief expert for the mobile robotics competition, talks about the event. Competition footage included.
	Date: 17 September 2009 Category:

	WorldSkills Calgary 2009 - Festo Interview Festo Canada President Thomas Lichtenberger talks about its involvement in WorldSkills. The event took place from Sept. 1 to 7.
	Date: 17 September 2009 Category:

[ 1 ] - [ 2 ] - [ 3 ]

Highest Rated

	WorldSkills Calgary 2009 - Festo Interview Festo Canada President Thomas Lichtenberger talks about its involvement in WorldSkills. The event took place from Sept. 1 to 7.
	Date: 17 September 2009 Category:

	WorldSkills Calgary 2009: Focus on Mechatronics Benoit Maisonneuve, chief expert for the mechatronics competition, talks about the event. Competition footage included.
	Date: 17 September 2009 Category:

	WorldSkills Calgary 2009 Takes Off Reporter Carolyn Yates talks to various experts about WorldSkills, which took place in Calgary from Sept. 1 to 7.
	Date: 17 September 2009 Category:

	Machine Safety Round Table 2009: PRODUCTIVITY Our experts discuss how to improve productivity with safety and avoid complacency.
	Date: 19 November 2009 Category:

	Machine Safety Round Table 2009: EDUCATION Our experts talk about education and long-term safety planning.
	Date: 19 November 2009 Category:

	Machine Safety Round Table 2009: LIABILITY Our legal expert analyzes the legal ramifications of Bill C-45.
	Date: 19 November 2009 Category:

	Machine Safety Round Table 2009: STANDARDS Our experts examine current safety standards and the push toward harmonization.
	Date: 19 November 2009 Category:

	Machine Safety Round Table 2009: LOOKING AHEAD Our experts look at the technologies and trends to watch for in 2010.
	Date: 20 November 2009 Category:

[ 1 ] - [ 2 ] - [ 3 ]

Featured

	How to keep Canadian manufacturers employed Following the release of a recent Labour Force Survey, we provide you with four tips on how to survive in the current economy.
	Date: 16 July 2010 Category:

	MA Editorial Board Roundtable In our June cover story, MA`s editorial board discusses ways in which manufacturers can make the most of the economic recovery. Here`s a sneak peak of what they had to say.
	Date: 15 June 2010 Category:

	Industry Update: April 15, 2010 Future bright for Canadian manufacturers; The secret to Toyota\'s recovery; and more...
	Date: 15 April 2010 Category:

	AIME training initiative reopens application process after funding boost Innovative manufacturers will benefit from a $12-million investment in the AIME Initiative, reopening the application process until Jan. 15, 2010.
	Date: 01 December 2009 Category:

	Machine Safety Round Table 2009: LOOKING AHEAD Our experts look at the technologies and trends to watch for in 2010.
	Date: 20 November 2009 Category:

[ 1 ]

Categories

How does your company compare to other Canadian manufacturers?

Our fifth annual Canadian Manufacturing Study

Click here for digital edition

↑ Grab this Headline Animator

Copyright © 2010 CLB MEDIA INC., | •