http://automationmag.com/ Fri, 10 Sep 2010 03:37:23 +0100 FeedCreator 1.7.3 http://automationmag.com//index.php?option=com_content&view=article&id=2786:ethercat-box-io&catid=37:wire-a-cable&directory=12 Beckhoff has introduced the new EP2338 EtherCAT Box. With the rugged EP2338, it has enhanced its IP 67 I/O system with an eight-channel digital variant used either as inputs or outputs. Moisture and dust resistant, the outputs handle load currents of up to 0.5 A, are short-circuit-proof and protected against inverse polarity. If a channel is used as an output, the input is read back in parallel and can additionally be used for short-circuit analysis.
www.beckhoff.ca
]]> Tue, 19 Jan 2010 19:35:45 +0100 http://automationmag.com//index.php?option=com_content&view=article&id=2634:feedthru-connector-system&catid=37:wire-a-cable&directory=12 ITT Interconnect Solutions has developed a new high-temperature electric power feedthru system for submersible pumps. ITT ICS' BIW specifically designed the connector feedthru system for operation with conductor temperatures up to 450°F (230°C). The engagement system between the high temperature feedthru and the mating surface connector includes a new Metal-Lok patented keying system, which prevents rotation of the surface connector should it be inadvertently turned or mishandled. The high temperature feedthru connector system is CSA-approved for use in Class I, Division 1 hazardous locations. The connector system is rated to 5,000VAC for up to 140A and features a pressure rating of 3000psig.
www.ittcannon.com
]]> Wed, 11 Nov 2009 21:54:24 +0100 http://automationmag.com//index.php?option=com_content&view=article&id=2614:flat-to-flat-cable-splitter-box&catid=37:wire-a-cable&directory=12 The VAZ-T1-FK-CLAMP1 AS- Interface flat-to-flat cable splitter box with two double-spring terminals from Pepperl+Fuchs is now rated for 8A operating current. It features a compact, one-part housing with IP20 protection for robust operation and simple installation. It is suited for machines that are built, tested and broken down for shipment before being reassembled at the customer plant.  Typical applications include general conveyor and specialty machines.
www.pepperl-fuchs.com
]]> Thu, 05 Nov 2009 16:34:10 +0100 http://automationmag.com//index.php?option=com_content&view=article&id=2612:interface-cables&catid=37:wire-a-cable&directory=12 Weidmuller has introduced a full line of pre-assembled specific interface cables in conjunction with an expanded line of space-saving universal interface modules for a range of industry-standard PLCs. Each cable assembly features a jacketed round cable attached directly to the original connectors for each specific PLC model I/O card. This system plugs directly into the PLC I/O cards for quick I/O signal termination. They are available for PLCs and micro PLCs from all major manufacturers, including Rockwell, Siemens, GE Fanuc, Telemecanique, Omron and ABB.
www.weidmuller.com
]]> Thu, 05 Nov 2009 16:31:10 +0100 http://automationmag.com//index.php?option=com_content&view=article&id=2611:terminal-blocks&catid=37:wire-a-cable&directory=12 WAGO Corp. has added 24 disconnect, diode and LED terminal blocks to its TOPJOBS terminal block line. The specialty feed-through blocks accommodate conductors AWG 22–12 and are available in two, three or four-pole variants with single, double or triple-deck configurations. Each DIN-rail mount block utilizes the standard TOPJOBS profile for seamless integration. Upcoming fuse terminal blocks variants will offer additional flexibility within the same compact footprint.
WAGO Corp. • www.wago.com
]]> Thu, 05 Nov 2009 16:27:01 +0100